Showing posts with label ultra dry red wine. Show all posts
Showing posts with label ultra dry red wine. Show all posts

Saturday, April 3, 2010

Mission Accomplished

above: bottles have been de-labeled and await sanitation

The Drinking Goat Brewing Co. closed March by bottling our ultra dry red wine. First we had to determine the acidity levels in our wine to decide whether or not we were going to have to treat it to raise the pH. Remember when you were in chemistry class in high school or college and you complained that what you were learning was entirely useless? Well get ready to stick your foot in your mouth. To determine the unknown acid content of our wine we turned to our old friend titration.

Materials:

- 3 drops of phenolphthalein (your indicator)

- 10 milliliters of wine grade sodium hydroxide (your reagent)

- Lab grade syringe with at least a 15 milliliter capacity and milliliter hash marks

- 15 milliliter sample of your wine (your unknown)

- small glass cup or beaker

Directions:

1. Put your indicator and wine in the glass beaker or cup

2. Add 1/2 a milliliter of your reagent

3. Swirl cup to mix reagent, indicator, and wine

4. If your red wine momentarily turns gray but stays red then repeat step #2 and #3, however if your red wine turns gray and stays gray you’re done and you should add up the number of milliliters of reagent to determine your titratable acidity in step #5

5. 1 milliliter of reagent = 0.1% titratable acidity

above: sodium hydroxide is added to our ultra dry red wine and phenolphthalein solution during titration

For a dry red wine you’re hoping for a titratable acidity of 0.6% to 0.7%. Our ultra dry red wine had a titratable acidity of 0.6%. We are relieved that we didn’t have to add any calcium carbonate (by way of smashing calcite and skeletal limestone with our rockhammers!).

Next, we soaked two dozen wine bottles we’d been collecting for the past several weeks in buckets of warm soapy water. After they soaked for about 24 hours all it took was a little scraping, hot water, and in some sticky cases some Goo Gone, to de-label the bottles. Then they were sanitized with a B-Brite solution and left to dry.

above: the fake-Frenchman fills a bottle with wine

For easier bottling, we racked our wine off of the French oak chips and into an Ale Pail with a stopcock spigot at the bottom. Then we filled each wine bottle, leaving about two inches of air at the top, and afterward we corked with agglomerated corks and our hand corker. The color is still a little on the weak side, but it has greatly improved from day one. The smell had improved since our last racking (thanks to the oak chips) and we noticed that as the wine trailed down the side of the carboy it seemed to have pretty nice legs. We ended with 19 bottles of our ultra dry red wine. Considering the low wine quality of the grapes that were available to us (Concord) and that this is our first time using an entirely fresh grape must, I’d say that the DGBC can be proud of their efforts.

On call throughout this final stage we had the real-Frenchman, the fake-Frenchman, the avid Archeologist, the auburn Appalachian, the beautiful Swiss lady, and a newbie who we’ve come to call the aboriginal Anthropologist.

Stay tuned as we finish the semester bottling our cyser and brewing our oatmeal stout (among other beer adventures).

above: the aboriginal Anthropologist (left) and the auburn Appalachian (right) use the hand corker on one of the wine bottles

above: the aboriginal Anthropologist (left) and the auburn Appalachian (right) admire the finished project, 19 bottles of ultra dry red wine

Tuesday, February 9, 2010

Yup. We brewed that.

above: the rugged German (left) looms over as the fake-Frenchman (center) and the real-Frenchman (ground) rack the cyser

You can’t always get what you want (i.e. a perfect cyser on your first try) but sometimes you get what you mead. Ha. In the latest edition of the Drinking Goat Brewing Co. (DGBC), we had the largest brew-crew on record, with three regulars and two newbies. Sadly, the beautiful Swiss lady couldn’t join us, however the DGBC men were joined by the avid Archeologist and the auburn Appalachian (both women, how fun!). We also learned three valuable lessons:

1) Champagne yeast may not be the best route to go when shooting for a final alcohol content by volume (ABV) of 5.5% (because champagne yeast targets an ABV of 12%).

2) When trying to tweak the specific gravity of your must, THINK before adding water willynilly.

3) Don’t stick your face in the primary fermentation container just after you open it, as the concentrated alcohol vapors will make your eyes, nose, and mouth hurt for hours (and in the real-Frenchman’s case...days)

above: after primary fermentation, the apple parts, lees, and vanilla beans are caught by a filter; thus we rack our cyser

Our community covenant approved taste tester (curious...) thought our cyser lacked body and tasted a little weak. This was disheartening. To the DGBC crew, it smelled like a common European cloudy cider. We hope that with another few months of aging and bottle priming (carbonating) with honey we can fix our mistake, but we make no promises. We’re still looking forward to it though, because we made it!

The rugged German and the fake-Frenchman picked up some French oak chips for treating and rounding out our ultra dry red wine during a trip to Chicagoland Winemakers Inc. After treating our dark brown oaky delicious sexy...oak...in a warm water bath with crushed Campden tablets, they were added to our re-racked wine. The oak chips will be removed in a month when our wine is ready to be bottled.

above: the French oak chips soak in a warm sulfur bath

Upcoming brewing events involve oatmeal + rye stout, bottling wine (we’d love to use your empty red wine bottles), and titrating to determine our ultra dry red wine’s acidity (which we may or may not have to treat with limestone).

above: the rugged German (left) and the fake-Frenchman (right) sort grapes for the ultra dry red wine (this photo is from the archives)